VUE/Prometric Code:3M0-250
Exam: 3Com Certified Enterprise LAN Post-Sales Expert version 1.0
Q&A:99 Q&As
업그레이트:2010-06-28
3ComCertification 3M0-250 문제는 시험문제의 변화에 따라 업데이트가 될것입니다.시험문제가 매번 바뀐 후, 2일내에 시험문제 3M0-250 를 수정하여 다시 조정함으로서3M0-250:3Com Certified Enterprise LAN Post-Sales Expert version 1.0가 시험문제의 점유률을 항상 96% 이상으로 확보합니다
덤프다운로드바로가기:
6. What is the effect of the Simple Network Management Protocol (SNMP) switch command snmp-agent
target-host trap address udp-domain 129.102.149.23 udp-port 5000 params securityname 3comprivate?
A.Configures the switch with a default community string name of 3comprivate
B.Enables the SNMP trap functions on a switch with IP address 129.102.149.23
C.Configures the switch SNMP agent to send traps to the network management station at IP address
129.102.149.23
D.Enables the SNMP trap functions and sets the default community string name of 3compublic on a
switch with IP address 129.102.149.23
Answer: C
7. Which three are Switch 5500 configuration requirements when creating an eXpandable Resilient
Networking (XRN) Fabric? (Choose three.)
A.All units in the stack must have the same sysname
B.All units in the stack must be running the same software version
C.A mixture of switch models can be used to create a single XRN Fabric
D.Switch 5500-SI/EI up/down ports must be enabled for fabric mode
E.A switch must be initialized after it has been added to an existing XRN Fabric
Answer: ABD
8. What is the reason to connect the up port on the bottom Switch 5500 in the stack to the down port of
the top Switch 5500 in the same stack? A.Reliability - creates a resilient topology
B.Security - prevents an unauthorized user from connecting to the switch stack
C.Performance - creates the 48-Gbps eXpandable Resilient Networking (XRN) Fabric
D.Management - enables Distributed Resilient Routing (DRR) on the Switch 5500-SI
Answer: A
9. How does the network administrator configure the up/down Switch 5500-EI/SI ports to operate in fabric
mode?
A.By default, the up/down ports are enabled for fabric mode
B.Execute the command xrn-fabric authentication-mode simple
C.Execute the command resilient-arp enable x/x/x where x/x/x identifies the unit and port number
D.Execute the command fabric-port gigabit x/x/x enable where x/x/x identifies the unit and port number
Answer: D
10. Which Switch 5500 model(s) does not support Distributed Resilient Routing (DRR)?
A.Switch 5500-EI
B.Switch 5500-SI
C.Switch 5500G-EI
D.All of the above
Answer: B
11. Which security standard is defined by IEEE 802.1X Network Login?
A.Encryption standard for network authorization
B.Port-based Network Access Control protocol standard
C.Extensible Authentication Protocol (EAP) standard for network authorization
D.Authentication, Authorization and Accounting (AAA) standard for network access
Answer: B
3M0-250 덤프다운로드바로가기: http://www.killtest.kr/3ComCertification/3M0-250.asp